Required Tools and Parts

Depending on your application and system configuration, the following tools and parts may be required:

• Phillips screwdrivers to install the rack-mount ears, and to mount the unit in a 19"-rack

• Ethernet cables (see Connecting Network Cables).

Required GNSS Antenna Components

Should you plan on using a GNSS Global Navigation Satellite System is the generic term for all navigation satellite constellations, i.e. GPS, GLONASS, Galileo, Beidou, QZSS. reference with your SecureSync, you will also need the following items (sold separately):

• Antenna cable with SMA connector, or conversion cable

  Note: The SMA-to-N-type conversion cable included in the ancillary kit is approved for pull weight of up to 60 lbs. If you are using a heavier cable, you will need to apply appropriate strain relief.
  

• GNSS antenna with mounting bracket
• GNSS antenna surge suppressor (recommended)
• GNSS antenna inline amplifier (optional for short cable lengths)

For antenna installation guidelines, see the separate documentation shipped with the antenna components.