You Are Here:
You are here: Reference > Default Settings

Default Settings

The factory settings are considered default settings. You can restore these settings at any time by navigating to Options > Reset to factory defaults.

The default settings are:

  • Transmit power: -125 dBm
  • External attenuation: 0 dB
  • Interface type: Ethernet
  • Obtain IP automatically: Yes
  • GPIB address: 01
  • Use 10 MHz input: No
  • Simulate Noise: No
  • RequiredCN0: 44
  • NoiseBW: 20.46
  • NoiseOffset: 0
  • Scenarios: See Pre-Installed Scenarios.
  • Trajectories: See Trajectories.
  • Events: See Event Data.