SOURce:FILe:TYPe

Function

This commands are used to transfer a file to the unit. The order of commands is fixed: Type, name, length checksum and data.

SOURce:FILe:TYPe sets the type of the file transferred.

Valid files types are:

• CALibration
• FIRMware
• SCENario
• TRAJectory
• RSGTRAJectory
• EPHemeris
• ALManac
• EVEnt
• ENVironmentmodel
• ANTenna

Command Syntax

SOURce:FILe:TYPe <file type>

Note

Command not allowed during scenario execution, and will result in the error code “-190,"Execution in progress"”.