You Are Here:
You are here: SCPI Guide > Command Reference > Source Subsystem > SOURce:NOISE:BW

SOURce:NOISE:BW

Function

Set the noise simulation bandwidth. This command is only available with GSG-55 units.

Command Syntax

SOURce:NOISE:BW <decimal>

Note

Setting not stored during scenario execution or 1-channel mode execution. This command is only available with GSG-55 units.

Parameter

Noise simulation bandwidth in MHz:, Decimal number in range [0.001 … 20.46].

Example

SEND:

SOURce:NOISE:BW 18.001