You Are Here:
You are here: SCPI Guide > Command Reference > Source Subsystem > SOURce:NOISE:CNO

SOURce:NOISE:CNO

Function

Set the maximum carrier-to-noise density of the simulated signals.

Command Syntax

SOURce:NOISE:CNO <decimal>

Note

Setting not stored during scenario or 1-channel mode execution.

The actual C/N0 of individual signals may be lower than this setting due to various reasons (distance, elevation, modified by event, etc).

Parameter

C/N0 in dB·Hz. A decimal number, within the range [0.0 … 56.0].

Example

SEND:

SOURce:NOISE:CNO 44.1