You Are Here:
You are here: SCPI Guide > Command Reference > Source Subsystem > SOURce:NOISE:OFFSET

SOURce:NOISE:OFFSET

Function

Set the frequency offset of the simulated noise from the GPS L1 center frequency (1.57542 GHz).

For example, if the noise bandwidth is set to be 20 MHz, and offset is 10 MHz, the noise will be simulated on frequency band 1575.42 … 1595.42 MHz.

Command Syntax

SOURce:NOISE:OFFSET <decimal>

Note

Setting not stored during scenario or 1-channel mode execution. This command is only available in GSG-55.

Parameter

Noise frequency offset in MHz. A decimal number within the range [-10.23 … 10.23].

Example

SEND:

SOURce:NOISE:OFFSET 2.0