You Are Here:
You are here: SCPI Guide > Command Reference > Source Subsystem > SOURce:ONECHN:FREQuency

SOURce:ONECHN:FREQuency

Function

Set & store 1-channel mode frequency offset (use this command only while the unit is not generating any RF).

Parameter can also have optional suffix (MHz, kHz or Hz).

Command Syntax

SOURce:ONECHN:FREQuency <decimal>

Parameter

decimal [-6000000, 6000000] in Hz

Example

SEND:

SOURce:ONECHN:FREQuency -54

SEND:

SOURce:ONECHN:FREQuency 4.345 MHz