You Are Here:
You are here: SCPI Guide > Command Reference > Source Subsystem > SOURce:ONECHN:STARTtime

SOURce:ONECHN:STARTtime

Function

Set & store 1-channel mode start time (use this command only while the unit is not generating any RF).

Command Syntax

SOURce:ONECHN:STARTtime <string>

Note

Seconds are omitted, always starts at 0 seconds.

Parameter

String of format DD/MM/YYYY hh:mm, where:

  • DD=day, MM=month, YYYY=year, hh=hour, mm=minutes

Example

SEND:

SOURce:ONECHN:STARTtime 23/11/2010 12:45