You Are Here:
You are here: SCPI Guide > Command Reference > Source Subsystem > SOURce:POWer

SOURce:POWer

Function

Sets the transmit power of the device. During scenario execution all signals on all bands will get the new transmit power, and all possible power offsets between different satellite constellations and frequency bands are discarded.

Command Syntax

SOURce:POWer <decimal>

Note

Setting not stored during scenario or 1-channel mode execution.

If power is inside allowed limits, but other RF parameters need to be modified, such parameters are modified and an error about settings conflict is set.

Parameter

decimal [-160,-65] dBm

Example

SEND:

SOURce:POWer -123.2