+1.585.321.5800
SOURce:SCENario:CONTrol
Function
Control the execution of the scenario.
Command Syntax
SOURce:SCENario:CONTrol <START|STOP|HOLD|ARM>
Notes
The scenario must be loaded beforehand using SOURce:SCENario:LOAD
.
Calling a START command will first automatically stop any running scenarios. HOLD can be used to pause and resume trajectory movement, not the entire scenario. HOLD is effective when a scenario is running.
ARMing a scenario means to hold a scenario before it is started.
Parameter
enum {START,STOP,HOLD,ARM}
Example
SEND:
SOURce:SCENario:CONTrol start