You Are Here:

SOURce:SCENario:DATEtime

Function

Set the scenario start time as GPS time.

Command Syntax

SOURce:SCENario:DATEtime <MM-DD-YYYY hh:mm | NTP>

Note

If scenario is running or armed, an error is returned.

Parameter

String format:

  • MM-DD-YYYY hh:mm

…where MM=Month {01-12}, DD=day of month {01-31}, YYYY=year, hh=hours {00-23}, mm=minutes {00-59}.

For Simulate Now, the string must be“NTP”.

This command changes start time of the currently loaded scenario, but does not change the scenario file, so that when you try to edit the scenario, you will see unchanged parameters from the file.

Example

SEND:

SOURce:SCENario:DATEtime 11-11-2011 11:11

SEND:

SOURce:SCENario:DATEtime NTP