You Are Here:
You are here: SCPI Guide > Command Reference > Source Subsystem > SOURce:SCENario:FREQBAND:POWer

SOURce:SCENario:FREQBAND:POWer

Function

Set the power for a frequency band (all satellites) when scenario is running. Freqband is used to specify the frequency band. The freqband value ALL means that the power for all bands is adjusted by the amount indicated.

Command Syntax

SOURce:SCENario:FREQBAND:POWer <decimal>[,<freqband>]

Note

Only available during scenario execution.

Parameter

Decimal [-160.0,-65.0] dBm if freqband is not ALL. For ALL, the limits are [-100,100] dB.

FreqBand [L1, L2, L5, ALL]

Examples

SEND:

SOURce:SCENario:FREQBAND:POWer -115,L1

SEND:

SOURce:SCENario:FREQBAND:POWer 10,ALL