+1.585.321.5800
SOURce:SCENario:NAV
Function
Turn ON/OFF RINEX navigation data logging.
The generated files are in RINEX 3.0.2 mixed format, so the information for all the simulated constellations/satellites will be written into one file.
Note that the RINEX data is logged only when the GSG generates new navigation message sets, which is not done often. Therefore, the recommended way to use this command is to turn ON RINEX navigation data logging before a scenario is started. Logging is stopped when scenario stops. See the GSG User Manual for naming of the generated files.
Command Syntax
SOURce:SCENario:NAV <ON|OFF>
Parameter
ON | OFF
Example
SEND:
SOURce:SCENario:NAV ON