You Are Here:

SOURce:SCENario:SATid[n]?

Function

Query the current satellite identifier of channel n. The parameter n can be 1-5 for GSG-52/53, 1-8 for GSG-54, 1-16 for GSG-55/GSG-56 and 1-32/48/64 for GSG-62/63/64. The returned satellite identifier can be:

  • Gxx for GPS for example G12
  • Rxx for GLONASS, for example R15
  • Exx for Galileo, for example E01
  • Cxx for BeiDou, for example C11
  • Jxx for QZSS, for example J02
  • Ixx for IRNSS, for example I01
  • Sxxx for SBAS for example S120
  • UG for unmodulated GPS signal
  • UE for unmodulated Galileo signal
  • UC for unmodulated BeiDou signal
  • UJ for unmodulated QZSS signal
  • UI, for unmodulated IRNSS signal
  • URx for unmodulated GLONASS signal. X is the frequency slot from -7 to 6

Would the signal be a multipath signal, this is identified by an added character D at the end. The satID is returned with a leading timestamp.

Command Syntax

SOURce:SCENario:SATid[n]?

Note

Only available during scenario execution.

Example

SEND:

SOURce:SCENario:SATid5?

READ:

123.4,R23