STATus:QUEStionable:ENABle
Function
Enable the Questionable Data/Signal Status Reporting by setting the enable bits of the status questionable enable register.
This enable register contains a mask value for the bits to be enabled in the status questionable event register. A bit that is set true in the enable register enables the corresponding bit in the status register. An enabled bit will set bit #3, QUE (Questionable Status Bit), in the Status Byte Register if the enabled event occurs.
Command Syntax
STATus:QUEStionable:ENABle <decimal data>
Parameters
<decimal_data> = the sum (between 0 and 16384) of all bits that are true. See the table on previous chapter.
Returned format
<Decimal data>
Example
SEND:
STAT:QUES:ENAB 16384
In this example ‘unexpected parameter’ bit 14 will set the QUE-bit of the Status Byte when a questionable status occurs.