SOURce:SCENario:PRYRate TIME
Function
Sets the rate of change in Vehicle Attitude in 3-dimensions about the center of mass as Pitch Rate, Roll Rate, and Yaw Rate when scenario is running. The Rate of Attitude change terms are defined in Radians per second.
When the PRY rate is active the changes will be applied in the order of pitch, roll, and yaw. Note that this order matters and can’t be controlled by user, but angle arguments will have to adapt to this order.
Command Syntax
SOURce:SCENario:PRYRate TIME,<decimal>,<decimal>,<decimal>
Parameter
Decimal Pitch Rate [-π, +π] Radians per second
Decimal Roll Rate [-π, +π] Radians per second
Decimal Yaw Rate [-π, +π] Radians per second
Example
SEND:
SOURce:SCENario:PRYRate 123.4,-2.0000,2.0000,1.0000