You Are Here:

SOURce:SCENario:RATEHEading TIME

Function

Sets the heading change rate. Rate is expressed as degrees per second. Heading will be updated each epoch according to the specified constant rate. Next position is calculated using direct rhumb line method (movement with constant heading). Pay attention that specifying constant heading rate results in non-constant curvature radius, thus it is not suitable for creation of closed-circle trajectories.

Command Syntax

SOURce:SCENario:RATEHEading TIME,<decimal>

Parameter

Decimal RateHeading [-180.000, 180.000] true heading change in decimal degrees per second. Positive value correspond to right turn, negative – left turn.

Example

SEND:

SOURce:SCENario:RATEHEading 123.4,5.500