You Are Here:
You are here: SCPI Guide > RSG Command Reference > RSG Commands > SOURce:SCENario:SVPos[n]?

SOURce:SCENario:SVPos[n]?

Function

Queries a satellite’s ECEF position using a Satellite ID.  The user can specify all satellite types supported including their multipath duplicates by satID.  An optional location argument is specified to allow use with GSG’s simulating user position or with systems using base station operation.  If no location is specified, the user value is assumed.

Command Syntax

SOURce:SCENario:SVPos[n]? <satID>,<location>

Note

If no scenario is running, an error is returned.

If the base station location is not enabled, 0 values are returned.

Parameters

Integer [1:N] – Satellite index of the satellite. Maximum is number of satellites

satID – GPS, Glonass, Galileo, BeiDou, QZSS, IRNSS and SBAS are supported. The format is explained under SOURce:ONECHN:SATid?.

Location – user or base

Example

SEND:

SOURce:SCENario:SVPos? G20

READ:

13802999.54,18312013.72,13305242.14