You Are Here:
You are here: SCPI Guide > RSG Command Reference > RSG Commands > SOURce:SCENario:TURNRADIUS

SOURce:SCENario:TURNRADIUS TIME

Function

Sets the radius of turning. Radius is expressed in meters. The next position is calculated using direct orthodromic method (moving along shortest path with non-constant heading). Use this command to simulate movement along arc of circle regardless of velocity changes. Heading rate is varying each epoch, but radius of turning will be constantly equal to value specified.

Command Syntax

SOURce:SCENario:TURNRADIUS TIME,<decimal>

Parameter

Decimal TurnRadius [-5 000 000.000, 5 000 000.000] radius of turning in meters. Positive value correspond to right turn, negative – left turn.

Example

SEND:

SOURce:SCENario:TURNRADIUS 123.4,500 – start right turn with radius of 500 meters