You Are Here:
You are here: SCPI Guide > RSG Command Reference > RSG Commands > SOURce:SCENario:TURNRATE

SOURce:SCENario:TURNRATE TIME

Function

Sets the rate of turning. Rate is expressed as degrees per second. Next position is calculated using direct orthodromic method (moving along shortest path with non-constant heading). Use this command to simulate movement along arc of circle or closed circle trajectory with constant velocity. Heading rate is varying each epoch, but overall average rate along single full closed circle will be equal to the value specified.

Command Syntax

SOURce:SCENario:TURNRATE TIME,<decimal>

Parameter

Decimal TurnRate [-180.000, 180.000] desired average heading rate (over single full closed circle) in decimal degrees per second. Positive value correspond to right turn, negative – left turn.

Example

SEND:

SOURce:SCENario: RATEHEading 123.4,5.500