You Are Here:

Trajectory FILE Format (.traj)

Files in the .traj file format can be created with the StudioView RSG Trajectory Editor, but an RSG license is not required to use these commands in a file.

All positioning commands can be written to the file as:

SOURce:SCENario:POSition TIME,<decimal>,<decimal>,<decimal>

or, without the SOURce:SCENario: part as:

POSition TIME,<decimal>,<decimal>,<decimal>

In the trajectory file format TIME must be a decimal number.

The resolution of the time stamps is 0.1 seconds (100 ms).