Using AC Input Power
Connect the AC power cord supplied in the NetClock ancillary kit to the AC input on the rear panel and the AC power source outlet. The AC input is fuse-protected with two fuses located in the AC power entry module (line and neutral inputs are fused). The AC power entry module also contains the main power switch for the AC power applied to the equipment.
Caution: This equipment has Double Pole/Neutral Line Fusing on AC power.
Note: Important! NetClock is earth grounded through the AC power connector. Ensure NetClock is connected to an AC outlet that is connected to earth ground via the grounding prong (do not use a two prong to three prong adapter to apply AC power to NetClock).