You Are Here:
You are here: SETUP > Connecting Supply Power

Connecting Supply Power

This section includes details on the NetClock’s AC and/or DC power systems (Note: The DC power option is available with NetClock 9483 only).

Depending on the equipment configuration at time of purchase, NetClock can be powered from:

  • an AC input
  • a DC input
  • with both AC, and DC input (DC input is an option for NetClock 9483 units only).

Supplying both AC and DC input power provides redundant and automatic power switchover in case one or the other input power sources is lost.

Before connecting power to the unit, be sure that you have read all safety information detailed in section SAFETY.