You Are Here:
You are here: SETUP > Configuring Outputs > 1PPS and 10 MHz Outputs > Configuring 10 MHz Output

Configuring the 10 MHz Output (NetClock 9483 Only)

To configure a10 MHz output:

  1. Navigate to INTERFACES > OUTPUTS, or to INTERFACES > OPTION CARDS (white on orange).
  2. In the panel on the right, click the GEAR button next to the 10 MHz output that you want to edit.
  3. The 10 MHz edit window will display. Choose a value from the Signature Control field drop-down list to determine what NetClock shall do with the output signal in the event its input reference is lost. For more information, see Signature Control.
  4. Click Submit.