You Are Here:

Troubleshooting – Unable to Open Web UI

With NetClock connected to either a stand-alone or networked PC and with the network configuration correct, it should be possible to connect to the Web UI.

Verify Current Status Indication Troubleshooting
LEDs on network connector Green “Good link” is not solid green NetClock ICMP test is failing. NetClock is not connected to PC via Ethernet connection 1) Verify one end of standard network cable is connected to NetClock’s Ethernet port and other end is connected to a hub/switch. Or a network cable is connected to NetClock and a stand-alone PC.
2) Verify network settings of NetClock are valid for the network/PC it is connected with (IP address is on the same subnet as the other PC).
Green “Good Link” is solid green on both NetClock and other end of network cable. NetClock ICMP test is passing. NetClock is connected to PC via Ethernet connection 1) Disconnect NetClock’s network cable and ping its assigned address to ensure no response (no duplicate IP addresses on the network).
2) Try accessing NetClock from another PC on the same network.
3) Network Routing/firewall issue. Try connecting directly with a PC and network cable.

Troubleshooting network connection issues