Determining Which GNSS Satellites Are Received

To see which GNSS satellites your SecureSync is currently receiving:

1. Navigate to INTERFACES > REFERENCES: GNSS 0.
2. The GNSS 0 status window will open:



3. Under Identified Satellite Signal Strengths hover with your cursor over the bars: The letter in the tooltip window displayed for each signal bar indicates which constellation the satellite belongs to:

   Letter symbol	GNSS Constellation
   G	GPS
   R	GLONASS
   E	Galileo
   J	QZSS
   C	BeiDou
   I	IRNSS

   The number next to the letter indicates the satellite number. The number below indicates the signal strength (C/N_o).