+1.585.321.5800
Notification Event Types
The following types of events can be used to trigger notifications:
Timing Tab: Events
- In Sync
- Not In Sync
- In Holdover
- No Longer in Holdover
- Frequency Error
- Frequency Error Cleared
- 1PPS Not In Specification
- 1PPS Restored to Specification
- Oscillator Alarm
- Oscillator Alarm Cleared
- Reference Change (Cleared)
- Reference Change
GPS Tab: Events
- Too Few GPS Sat, Minor Alarm
- Too Few GPS Sat, Minor, Cleared
- Too Few GPS Sat, Major Alarm
- Too Few GPS Sat, Major, Cleared
- GPS Antenna Problem
- GPS Antenna OK
- GPS Receiver Fault
- GPS Receiver Fault Cleared
Under the GPS Events tab, you can also configure Minor and Major Alarm Thresholds for GNSS fault events; see Configuring GPS Notification Alarm Thresholds.
System Tab: Events
- Minor Alarm Active
- Minor Alarm Inactive
- Major Alarm Active
- Major Alarm Inactive
- Unit Reboot
- Timing System Software Error
- Timing System Hardware Error
- High TemperatureTemperature alarms are based on the CPU temperature., Minor Alarm
- High Temperature, Minor, Cleared
- High Temperature, Major Alarm
- High Temperature, Major, Cleared