Outputs Status Monitoring
Per standard configuration, SecureSync is equipped with one 1PPS and one 10 MHz output. Additional outputs can be added by means of output option cards.
Outputs can be monitored in real time via the INTERFACES drop-down menu. The menu will populate dynamically, depending on which outputs are installed.
To display a list of all the outputs installed in a SecureSync unit:
- To display more detailed information about a particular output, click the corresponding INFO button.
- To edit the settings of an output, click the GEAR button Configuring Outputs
- To refresh the information displayed, click the REFRESH button (circling arrows icon on the right side of the screen).
- On the rear panel illustration, click on an output connector to highlight its list entry.
To monitor all the outputs of a particular category (PPS, for example) simultaneously:
- Navigate to INTERFACES > OUTPUTS, and click the desired output category (not recessed e.g., PPS Output):
- The Status window will display a list of all outputs of the selected category:
- To display more detailed information about a particular output, click the corresponding INFO button.
- To edit the settings of a given output, click the GEAR button Configuring Outputs
- To refresh the information displayed, click the REFRESH button (circling arrows icon).
- In the illustration of the rear panel, click on a connector to highlight the corresponding list entry.
The outputs installed in your SecureSync unit have specific settings that can be reviewed, and—to some extent—edited.
To display the settings of an output:
- Navigate to INTERFACES > OUTPUTS, and click on the desired output (recessed e.g., PPS Output 0):
- The corresponding Status window will display:
Click the Edit button in the bottom-left corner to configure settings that are user-editable. Configuring Outputs