You Are Here:
You are here: APPENDIX > OPTION CARDS > Field Installation > 10: AlarmRelay Card, Cable Installation

[10]: Alarm Relay Card, Cable Installation

Additional steps for the installation of the Alarm Relay Output card (PN 1204-0F).

  1. Connect the supplied cable, part number 8195-0000-5000, to the mainboard connector J19 “RELAYS”.

  2. Cable routing

  3. Using the supplied cable ties, secure the cable, part number 8195-0000-5000, from the option card to the white nylon cable tie holders fastened to the mainboard (see figure above).