You Are Here:

Option Card Connectors

The table below lists the connector types used in SecureSync option cards.

Option card connectors

Connector Illustration Electr. Signals Timing signals
BNC Differential TTL xV, sine wave, programm. square wave, AM sine wave, DCLS 1PPS, frequency,
IRIG, HAVE QUICK,
PTP
ST Fiber Optic AM sine wave, DCLS IRIG, 1PPS
Terminal Block
[Recommended mating connector:
Phoenix Contact, part no. 182 7787]
RS-485 1PPS, frequency,
ASCII time code,
IRIG, HAVEQUICK, Alarm, T1/E1
DB-9 RS-232, RS-485 ASCII time code,
GPS NMEA, data clocks,
CTCSS frequency,
1PPS, Alarm signal
DB-25 Differential TTL xV, RS-485 STANAG
RJ-12 RS-485 data clock, CTCSS frequency,
1PPS, Alarm
RJ-45 Gb-Ethernet PTP timing signal
SFP Ethernet NTP timing signal, PTP timing signal
SMA RF, differential TTL xV, sine wave, programm. square wave, AM sine wave, DCLS 1PPS, frequency