You Are Here:
You are here: INSTALL & SETUP > Rack Mounting: SAFETY

Rack Mounting: SAFETY

  • Read YOUR SAFETY.
  • Before installing VelaSync in the fully extended rails, or before extending the unit from the rack, ensure that the rack is stable enough to support the weight of the fully extended unit. If you are using a standalone rack, it may be necessary to install stabilizers to the rack.
  • Always extend only one unit at a time.
  • Install heavier servers near the bottom of the rack.
  • The unit weighs approximately 24 lbs (11 kg). Depending on your chosen installation location, it may be advisable to lift the unit with two persons.