You Are Here:

Creating a Login Banner

A login banner is a customizable banner message displayed on the login page of the VersaSync Web UI. The login banner can be used e.g., to identify a unit.

Login banner (example)

To configure a login banner:

  1. Navigate to the MANAGEMENT > Network Setup screen.
  2. In the Actions panel on the left, click Login Banner.
  3. The Network Access Banner window will display. Check the box Enable Custom Banner.
  4. In the Plain Text Banner text box, type in your custom text.
  5. Note: The Plain Text Banner is used to create a message for all interactive login interfaces (Web UI, telnet, SSH, FTP, SFTP, serial, etc.). It is not required to include HTML tags.

  6. Optionally, you may also use the Web Interface Banner text box.
  7. Note: Enabling and using the Web Interface Banner text box will allow you to apply HTML formatting tags to your message (e.g., colors). Note that this functionality is limited to browser-based Web UI access.

  1. To test your new banner, click Apply to see a preview at the bottom of the window. OR, click Submit, and log out of the Web UI, and back in so as to see the banner on the actual login page.