General Network Settings

To expedite network setup, VersaSync provides the General Settings window, allowing quick access to the primary network settings.

To access the General Settings window:

  1. Navigate to MANAGEMENT > Network Setup. In the Actions Panel on the left, click General Settings.

  2. Populate the fields:
    • Hostname: This is the server’s identity on the network or IP address.
    • Default IPv4 Port: Unless you specify a specific Port to be used as Default Port, the factory default port eth0 will be used as the gateway (default gateway).
    • Default IPv6 Port: Unless you specify a specific Port to be used as Default Port, the factory default port eth0 will be used as the gateway (default gateway).

    3. The General Settings window also displays the IPv4 Address and default IPv4 Gateway.