Configure I/O Settings
Note: Illustrations shown below are examples; the windows displayed in your Web UI may look differently.
How to Configure an Input Reference
To access the user-editable settings of an Input Reference, choose one of these two methods:
- In the INTERFACES > REFERENCES drop-down menu, click REFERENCES (white on orange), or an input reference category (e.g., "GNSS reference").
- In the Status window, click the GEAR button next to the desired input reference.
- The settings window for the chosen reference will be displayed. Edit the field(s) as desired.
For more information, see Managing References.
How to Configure an Output
To access the user-editable settings of an Output, choose one of these two methods:
- Under INTERFACES > OUTPUTS, click the desired output.
- The Status window for the specific reference you selected will be displayed. Click the Edit button in the bottom-left corner.
- The settings window for the chosen output will be displayed. Edit the field(s) as desired.
- In the INTERFACES > OUTPUTS drop-down menu, click OUTPUTS, or one of the output categories (not indented to the right)
- In the Status window, click the GEAR button next to the desired output.
-
The settings window for the chosen output will be displayed. Edit the field(s) as desired.
Note: Offset values for outputs are set in 20 ns increments and will round to the nearest multiple of 20 if not set to one exactly.