Accessing the Web UI

VersaSync's Web UI is the recommended tool to interact with the device, since it provides access to nearly all configurable settings, and obtain comprehensive status information without having to use the Command Line Interpreter (CLI).

You can access the Web UI either by using the default IP address, an automatically assigned DHCP IP address, or by using a manually set static IP address (see Assigning a Static IP Address).

1. On a PC connected to VersaSync via ETH1 or ETH0, start a web browser.
2. Navigate to the IP address assigned or identified in Initial Network Setup.

3. Log into the Web UI as an administrator. The factory-default administrator user name and password are:

   Username: spadmin

   Password: admin123

   Note: For security reasons, it is advisable to change the default credentials; see: Managing Passwords.

4. Upon initial login, you will be asked to register your product. Orolia recommends to register your VersaSync, so as to receive software updates and services notices. See also Product Registration.