Setting up a Static IP Address via Ethernet Cable

This procedure will allow you to configure SecureSync using the Web UI directly via the Ethernet port, if you cannot or do not wish to use a DHCP network.

1. First, disable DHCP using the front panel keypad and information display: see Setting Up an IP Address via the Front Panel.
2. Change the workstation IP address to be on the same network as SecureSync.
3. Connect workstation and SecureSync with an Ethernet cable.

The remainder of the configuration settings will be performed via the Web UI (accessed via an external workstation with a web browser such as Firefox^® or Chrome^®). For more information, see The Web UI HOME Screen.