+1.585.321.5800
Configuring a 1PPS Output
To configure a 1PPS output:
- Navigate to INTERFACES: OUTPUTS, or to INTERFACES: OPTION CARDS (white on orange).
- In the panel on the right, click the GEAR button next to the 1PPS Output you want to edit.
- The 1PPS Output Edit window will display, allowing the following items to be configured:
- Signature Control: Determines when the output is enabled. For more information, see Signature Control.
- Offset [ns]: Allows to offset the system's 1PPS on-time point, e.g. to compensate for cable delays and other latencies [range = –500000000 to 500000000 ns = ±0.5 s]
- Edge: Used to determine if the on-time point of the 1PPS output is the rising or the falling edge of the signal.
- Rising
- Falling
- Pulse Width [ns]: Configures the Pulse Width of the 1PPS output.
-
Click Submit.
[range = 20 to 900000000 ns = 0.0 μs to 0.9 s]
[default = 200 ms]