Configuring the TSync Product
TSync cards can be adapted to your application by utilizing the following functionality:
Interrupts
The card generates interrupts that can then be queried. For example, a 1PPS interrupt can be generated that can be utilized via a WAITFOR blocking call. Available interrupts are listed under Interrupts.
Match Time
Using one or several of the four General Purpose Outputs (GPO’s), a Match Time signal can be sent out, in order to trigger an event at a preset time, e.g. during a simulation.
Time Stamping
Using one or several of the four General Purpose Inputs (GPI’s), an event can be sent to the TSync card that will then be time stamped by the card. An application example would be a camera shutter signal that can be used to assign a time stamp to an image captured.